Airtac SAIJ160 Adjustable Cylinder SAIJ160BX220-75S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX220-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 220mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke220 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX220-75S
It features a SUS304 stainless steel rod and a built-in magnet for position sensing. The integrated adjuster allows you to trim the 220mm nominal stroke back by up to 75mm, creating a precise 145 to 220mm usable travel window for highly controlled end-position tuning.
This adjustable stop is ideal for product changeovers, letting you fine-tune the retract position without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-load holding, consider an external rod lock or the SAIL series.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX220-75S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX220-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX220-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX220-75S Is Used
Variable End-Stop Tuning
Dial in the exact retract distance within the 145-220mm window during machine commissioning to accommodate different material thicknesses without mechanical rebuilds.
Product Size Changeover
Quickly adjust the stroke stop on automated packaging lines when switching between different container sizes, minimizing downtime and maximizing line flexibility.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX220-75S the Right Cylinder?
The generous 75mm adjustment window is perfect for prototyping or production lines running mixed product sizes, whereas a fixed-stroke SAI cylinder is better suited for single, unchanging end-of-stroke applications. Because the 220mm stroke exceeds 300mm? No, it is under 300mm, but with a heavy 40mm rod and M36x2 thread, it handles high side loads well, though an external guide is always recommended for heavy off-center loads.
To match this exact ISO 15552 interchangeable footprint, specify: 160mm bore, 220mm stroke, 75mm adjustment, PT tapered port thread, SUS304 (B) rod material, and the -S magnet option. Standard mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX220-75S FAQ
The rear adjuster screw acts as a mechanical stop that lets you shorten the 220mm nominal stroke by up to 75mm, providing a usable travel window of 145 to 220mm. It only sets the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX220-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.