Airtac SAIJ160 Adjustable Cylinder SAIJ160BX225-75
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX225-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 225mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke225 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX225-75
The AirTAC SAIJ160X225-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 225 mm stroke with a usable travel window of 150 to 225 mm, allowing you to dial back the retract position by up to 75 mm during commissioning.
This adjustable stopper lets you fine-tune end positions on product changeovers without swapping the cylinder or adding external stops. The rear adjuster and variable air cushions only decelerate the travel end; they do not hold the load without live air. For position holding, use a SAIL lock or BSAI clamp-lock cylinder.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX225-75 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX225-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX225-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX225-75 Is Used
Heavy Press Tuning
Dial in the exact 150 to 225 mm end position during heavy press commissioning without external stopper hardware.
Product Changeover
Quickly adjust the retract stop for varying product sizes on a machining line, saving setup time.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX225-75 the Right Cylinder?
The adjustable stroke is ideal for variable end stops and machine setup, whereas a fixed SAI cylinder suits dedicated single-purpose stations. The robust 40 mm SUS304 rod handles high side loads, but at 225 mm stroke you should still guide the load externally.
To replace an ISO 15552 cylinder, match the 160 mm bore, 225 mm stroke, 75 mm adjustment, PT G3/4 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting. Add an -S magnet if you need CMSE reed or DMSE electronic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX225-75 FAQ
At 0.7 MPa, the push force increases to 14074 N.
The rear adjuster acts as a stopper to shorten the effective travel. For this 225 mm stroke model, you can trim the retract position back by up to 75 mm, creating a usable 150 to 225 mm travel window.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX225-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.