Airtac SAIJ160 Adjustable Cylinder SAIJ160BX230-75S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX230-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 230mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke230 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX230-75S
Its SUS304 stainless steel rod (code B) provides excellent corrosion resistance, while the integrated magnet (-S) enables precise position detection with CMSE reed and DMSE electronic sensors. A PT tapered port ensures a robust, leak-free pneumatic connection.
This model features a 230mm nominal stroke that can be fine-tuned down by up to 75mm, creating a usable travel window of 155-230mm. The rear screw acts purely as a mechanical stop to set the end position during commissioning; it does not lock the load without live air. The extruded aluminum barrel includes sensor grooves on both sides, and mounting options span Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX230-75S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX230-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX230-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX230-75S Is Used
Variable End-Stop Tuning
Dial in the exact retract position within the 155-230mm window during machine setup, allowing rapid accommodation of new product dimensions without swapping cylinders.
Corrosive Assembly Lines
Utilize the SUS304 stainless steel rod and 155-230mm adjustable travel to drive clamping mechanisms in washdown or mildly corrosive industrial environments.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX230-75S the Right Cylinder?
Select this 160mm bore cylinder when an application requires heavy thrust up to 14074N at 0.7MPa, but stepping up to a 200mm bore (21991N at 0.7MPa) would be excessive. Choose the SAIJ adjustable-stroke configuration over a fixed SAI model when you need variable end-stops for product changeovers. To replicate this exact ISO 15552 replacement, match the 160mm bore, 230mm stroke, 75mm adjustment, PT port thread, SUS304 rod, and -S magnet.
Because the nominal stroke is 230mm, ensure adequate external guiding to handle side loads, as the 40mm rod diameter alone cannot support high lateral forces. For load-holding without continuous air pressure, the rear adjuster is insufficient; consider an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX230-75S FAQ
At 0.5MPa, the push force is 10053N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from its 230mm nominal length by up to 75mm. This creates a usable travel window of 155-230mm for fine-tuning end positions, but it does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX230-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.