Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-50S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX260-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 260mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke260 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-50S
The AirTAC SAIJ160X260-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 260 mm travel by up to 50 mm. This creates a precise 210-260 mm usable window for fine-tuning the retract end position during commissioning without swapping out the barrel.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for position sensing. The extruded aluminum barrel carries sensor grooves on both sides, compatible with AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts purely as a mechanical stop for end-position tuning; it does not hold the load without live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-50S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-50S Is Used
Machine Changeover
Dial in the exact retract position within the 210-260 mm window during product size changes without replacing the cylinder.
Position Sensing
Utilize the integrated magnet with DMSE solid-state sensors for precise position feedback in automated lines.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-50S the Right Cylinder?
The adjustable stroke is ideal for product changeovers where the exact retract distance varies, offering a built-in external stop instead of requiring fixed-stroke SAI cylinders. For load-holding without continuous air pressure, this cylinder is insufficient; the rear stop is not a brake, so you must integrate a SAIL pneumatic lock, a BSAI clamp-lock, or an external rod lock.
To match this ISO 15552 replacement, specify a 160 mm bore, 260 mm stroke, 50 mm adjustment range, PT tapered ports, and the -S magnet option. Mounting choices are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 260 mm stroke is relatively long, ensure external guide rails are used to support the load and prevent excessive side-loading on the M36x2 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-50S FAQ
The rear adjuster screw lets you shorten the 260 mm nominal stroke by up to 50 mm, providing a usable travel window of 210 to 260 mm. This allows you to set the exact retract end position during commissioning without adding external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.