Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-75
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX260-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 260mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke260 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-75
The AirTAC SAIJ160X260-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This creates a highly flexible 185-260 mm usable stroke window, letting you dial in the exact retract end-position during commissioning without adding external stops. Built with an extruded aluminum barrel, it delivers massive force, pushing with 14074 N at 0.7 MPa.
This heavy-duty unit uses a 40 mm SUS304 stainless steel rod with an M36x2 thread, offering excellent corrosion resistance and robust side-load capacity. Fluid is filtered air operated at 0.15-1.0 MPa, and the PT tapered porting ensures a tight, reliable seal. It reaches speeds of 30-500 mm/s and includes adjustable air cushions at both ends to manage the high kinetic energy of the 160 mm bore.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-75 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-75 Is Used
Heavy Machinery Changeover
Dial in the 185-260 mm travel window during equipment setup to accommodate different large product sizes without physically replacing the actuator.
End-Position Tuning
Fine-tune the retract stopper during commissioning to achieve exact positioning without fabricating custom external mechanical stops.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-75 the Right Cylinder?
The 75 mm adjustment range is ideal for product changeovers on large machinery, allowing rapid end-stop modifications without physically swapping the cylinder. It utilizes the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. Because the stroke is 260 mm, ensure an external guide supports the load to prevent excessive side-loading on the 40 mm rod. Remember that the rear adjuster is a travel stop, not a lock; for load-holding without live air pressure, specify a SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-75 FAQ
The rear adjuster acts as a mechanical stop that lets you shorten the 260 mm nominal stroke by up to 75 mm, creating a 185-260 mm usable travel window for fine-tuning at commissioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX260-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.