Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX270-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 270mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke270 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10
The AirTAC SAIJ160X270-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 260-270 mm usable travel window, allowing you to trim the effective stroke by up to 10 mm during commissioning without swapping the cylinder.
This heavy-duty actuator features a SUS304 stainless steel rod for superior corrosion resistance and operates at speeds of 30-500 mm/s. The extruded aluminum barrel includes sensor grooves on both sides, and while this specific SKU lacks a magnet, the design supports AirTAC CMSE reed and DMSE electronic sensors when needed.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10 Is Used
Heavy Press Tuning
Dial in the exact bottoming position of a high-force press during initial commissioning, using the 10 mm adjustment window to perfect the crush distance without external shims.
Product Changeover
Quickly adapt the retract end-stop on an automated line when switching to a slightly different product variant, saving time on physical machinery modifications.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10 the Right Cylinder?
If your setup demands less force, stepping down to a 125 mm bore yields 11045 N at 0.9 MPa. Conversely, moving up to a 200 mm bore provides 28274 N at 0.9 MPa. The adjustable rear stopper is ideal for fine-tuning machine setups, whereas a fixed SAI cylinder locks you into a single exact dimension.
Because the nominal stroke is 270 mm, ensure proper external guiding to prevent excessive side-loading on the rod. The rear adjuster acts strictly as a travel stop and does not hold the load without live air; for load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder. This model uses a PT tapered port thread and supports the SAIJ mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10 FAQ
At 0.5 MPa, the push force is 10053 N.
The rear adjuster screw allows you to shorten the 270 mm nominal stroke by up to 10 mm, creating a 260-270 mm usable travel window. It functions as a mechanical stop to fine-tune the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.