Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX270-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 270mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke270 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10S
The AirTAC SAIJ160X270-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end position at commissioning. With a nominal stroke of 270 mm and a 10 mm adjustment range, it provides a usable travel window of 260-270 mm without requiring external stops.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the PT tapered port threads ensure a tight, reliable pneumatic connection.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10S Is Used
Heavy Press Tuning
Dial in the exact 260-270 mm end position during machine commissioning to accommodate varying material thicknesses without adding external mechanical stops.
Product Changeover
Quickly adjust the rear stopper by up to 10 mm when switching the production line to a different product size, saving downtime on the factory floor.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10S the Right Cylinder?
If you need less force, stepping down to a 125 mm bore yields 6136 N; if you need significantly more power, a 200 mm bore provides 15708 N. The adjustable rear stopper is ideal for machine setups where product sizes frequently change, eliminating the need to physically swap out a fixed-stroke SAI cylinder.
Because the stroke is 270 mm, you should guide the load to prevent excessive side-loading on the rod thread (M36x2). The rear adjuster acts only as a travel stop and cannot hold the load without live air pressure; for fail-safe load holding, consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder. This SAIJ model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10S FAQ
The rear adjuster screw allows you to shorten the effective travel from the nominal 270 mm down to 260 mm. This creates a 260-270 mm usable window for fine-tuning the retract end position at commissioning without swapping the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX270-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.