Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX275-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 275mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke275 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-10S
The AirTAC SAIJ160X275-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a 10 mm trim. This yields a usable travel window of 265 to 275 mm, allowing precise end-position tuning at commissioning without swapping hardware.
Fitted with PT tapered ports and a -S magnet for CMSE or DMSE sensors, this 160 mm bore unit runs at 30 to 500 mm/s. The rear adjuster acts purely as a travel stop to set deceleration, meaning it will not hold a load without live air pressure. For secure load-holding, an external SAIL or BSAI locking cylinder is required.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-10S Is Used
Press Fit Tuning
Dial in the exact 265-275 mm insertion depth during machine setup to accommodate varying part tolerances without changing the cylinder.
Product Changeover
Quickly adjust the rear stopper by up to 10 mm when switching production lines to different package sizes, avoiding external stop modifications.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-10S the Right Cylinder?
If you need less force, stepping down to a 125 mm bore yields 6136 N; stepping up to a 200 mm bore provides 15708 N. The adjustable stroke is ideal for dialing in final positions, whereas a fixed-stroke SAI cylinder lacks this commissioning flexibility.
Ensure your ISO 15552 replacement matches these exact parameters: 160 mm bore, 275 mm stroke, 10 mm adjustment, PT ports, SUS304 (B) rod, and a -S magnet. Because the 275 mm stroke is relatively long for this large bore, always use an external guide to prevent excessive side-loading on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-10S FAQ
The rear adjuster is a travel stop, not a lock; it will not hold the load without continuous air pressure. For true load-holding, use an SAIL or BSAI cylinder.
The nominal stroke is 275 mm, and the -10 adjustment code allows you to shorten the effective travel by up to 10 mm. This creates a usable adjustable travel window of 265 to 275 mm for precise end-position tuning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.