Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-75
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX275-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 275mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke275 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-75
The AirTAC SAIJ160X275-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 275 mm travel by up to 75 mm for a precise 200-275 mm usable window.
This configuration features a SUS304 stainless steel rod for superior corrosion resistance and operates with PT tapered ports. The rear screw acts purely as a travel stop for product changeovers, meaning it cannot hold the load without live air pressure. For load-holding requirements, an external rod lock or the AirTAC SAIL series is required.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-75 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-75 Is Used
Heavy-Duty Forming
Dial in the exact 200-275 mm retract position for pressing or forming varied material thicknesses without retooling the entire fixture.
Product Changeover
Adjust the end stop on the fly during packaging line size changeovers, utilizing the 75 mm trim range to accommodate different carton depths.
Machine Setup
Fine-tune the retract end position during initial commissioning to perfectly align heavy 14074 N loads at 0.7 MPa without external shims.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-75 the Right Cylinder?
The generous 75 mm adjustment window is ideal for production lines handling multiple product sizes, allowing you to fine-tune the retract position at commissioning without swapping out the cylinder or adding external mechanical stops. If your force requirements are lower, stepping down to a 125 mm bore yields 6136 N at 0.5 MPa.
Because the 275 mm stroke exceeds the 300 mm threshold, an external guide is recommended to support the rod and prevent excessive side-loading. This model omits the -S magnet, so position sensing is not available out of the box. It utilizes a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-75 FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 75 mm, creating a usable travel window of 200 to 275 mm. This stopper sets the end position but does not lock the load without continuous air pressure.
At 0.7 MPa, the push force increases to 14074 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX275-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.