Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-10
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX280-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 280mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke280 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-10
The AirTAC SAIJ160X280-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering massive thrust up to 18095N at 0.9 MPa. It features a robust 40mm SUS304 stainless steel rod (code B) and a PT tapered G3/4 port. By turning the rear stopper screw, you achieve a precise 270-280mm usable travel window for exact end-position tuning.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during machine commissioning. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets. Note that the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-10 Is Used
Heavy Press Tuning
Dial in the exact 270-280mm end position during heavy press commissioning without changing the cylinder.
Product Changeover
Adjust the retract stop on the fly to accommodate varying product sizes moving down a conveyor line.
Machine Setup
Fine-tune the end-of-stroke position during initial machine setup to prevent mechanical interference.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-10 the Right Cylinder?
The 10mm adjustment window is ideal for fine-tuning the retract end during product changeovers rather than using a fixed-stroke SAI cylinder. For load-holding without continuous air supply, integrate an external rod lock or select an AirTAC SAIL or BSAI model.
To match this ISO 15552 interchangeable cylinder, specify: 160mm bore, 280mm stroke, 10mm adjustment, PT G3/4 port, SUS304 rod material, and no magnet. Because the 280mm stroke is substantial, ensure external guiding is used to prevent excessive side-loading on the 40mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-10 FAQ
Its maximum allowable operating pressure is 1.0 MPa.
The rear adjuster screw lets you trim the effective stroke within a 270-280mm window. It acts as a mechanical stop to fine-tune the end position, but it is not a lock and cannot hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.