Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-75
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX280-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 280mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke280 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-75
The AirTAC SAIJ160X280-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering robust thrust for heavy-duty automation. The extruded aluminum barrel features sensor grooves on both sides, and the standard PT G3/4 port ensures high airflow for rapid cycling.
This specific SKU features a 75mm adjustment range, creating a usable travel window between 205 and 280mm. You can fine-tune the retract end-position at commissioning without adding external stops. The rod is constructed from SUS304 stainless steel (code B) for superior corrosion resistance, and the cylinder operates at speeds of 30-500mm/s.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-75 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-75 Is Used
Product Size Changeover
Quickly reconfigure the retract distance on packaging lines running different carton sizes by dialing the 75mm adjuster instead of replacing hardware.
Heavy Press Tuning
Precisely set the forming depth on heavy-duty presses during initial commissioning, using the 205-280mm travel window to dial in the exact contact point.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-75 the Right Cylinder?
Select this 160mm bore cylinder when an application demands heavy thrust that a 100mm bore cannot provide, or when stepping down from a 200mm bore to reduce physical size and air consumption. The 75mm rear adjuster is ideal for production lines running mixed product sizes, allowing operators to dial in the exact end-stop during changeovers rather than physically swapping cylinders. For any fixed-position requirement, the standard SAI series is a simpler alternative.
When specifying this replacement, match the 280mm stroke, 75mm adjustment code, PT G3/4 port, and your required mounting accessory. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR brackets. Because the total stroke reaches 280mm, an external guide should be used to support the load and prevent excessive side-loading on the 40mm rod. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air pressure, so a SAIL or BSAI lock cylinder is required for dead-end holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-75 FAQ
The rear adjuster acts as a mechanical stop that shortens the nominal 280mm stroke by up to 75mm, providing an effective travel range of 205 to 280mm. It allows you to fine-tune the end position without swapping the cylinder, but it does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX280-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.