Airtac SAIJ160 Adjustable Cylinder SAIJ160BX290-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX290-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 290mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke290 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX290-10S
The AirTAC SAIJ160X290-10-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 9425N pull force at 0.5 MPa and a usable travel window of 280-290mm, letting you fine-tune the retract end-position by up to 10mm without adding external stops.
This variant uses a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel integrates sensor grooves on three sides. It uses PT tapered ports and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX290-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX290-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX290-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX290-10S Is Used
Heavy Press Tuning
Dial in the exact 280-290mm retraction distance during machine setup to accommodate varying material thicknesses without changing hardware.
Product Changeover Stops
Adjust the end-stop position on packaging lines when switching box sizes, using the rear screw rather than repositioning physical hard stops.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX290-10S the Right Cylinder?
Choose this adjustable-stroke model when your application requires exact end-position tuning during commissioning or product changeovers, avoiding the need to swap out a fixed-stroke SAI cylinder. If you need slightly less force, stepping down to a 125mm bore yields 5734N of pull at 0.5 MPa. For this 290mm stroke, an external guide is recommended to manage side-load risks on the 40mm rod.
The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure; for fail-safe load holding, consider an external rod lock or the SAIL series. To match this ISO 15552 dimensionally interchangeable cylinder, specify: 160mm bore, 290mm stroke, 10mm adjustment, PT G3/4 ports, SUS304 rod, and a -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX290-10S FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 10mm, creating a 280-290mm usable travel window. It acts as a mechanical stop to set the retract end-position and is not a lock, meaning it cannot hold the load without continuous air pressure.
At 0.7 MPa, the push force increases to 14074N, with a maximum operating pressure of 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX290-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.