Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-20
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX300-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 300mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke300 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-20
The AirTAC SAIJ160X300-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 280-300 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for straightforward mounting of CMSE or DMSE switches.
This unit uses a SUS304 stainless steel rod (option B) for superior corrosion resistance and features PT tapered port threads. The rear adjustment screw allows precise end-position tuning during commissioning without adding external stops. Note that the adjuster acts strictly as a travel stop, not a load-holding lock.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-20 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-20 Is Used
Heavy Press Positioning
Dial in the exact 280-300 mm end-stop for large presses during setup, ensuring precise material contact without external shims.
Product Changeover
Quickly adjust the stroke window on packaging lines when switching to different sized pallets or products.
Heavy-Duty Assembly
Provide high push force (up to 18095 N at 0.9 MPa) for joining heavy components while retaining the flexibility to tune the final end position.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-20 the Right Cylinder?
The 20 mm adjustment range is ideal for fine-tuning end stops during machine setup or product changeover, avoiding the need to swap out a fixed-stroke SAI cylinder. Because the 300 mm stroke is substantial, an external guide is recommended to manage side loads on the 40 mm rod.
For an exact ISO 15552 replacement, match the 160 mm bore, 300 mm stroke, 20 mm adjustment, PT port thread, SUS304 rod material, and no-magnet configuration. If your application requires the cylinder to hold a load without live air pressure, select a SAIL or BSAI series cylinder instead, as the SAIJ adjuster does not lock the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-20 FAQ
The rear adjuster screw allows you to shorten the 300 mm nominal stroke by up to 20 mm, giving a usable travel window of 280-300 mm. This stopper fine-tunes the retract end position but does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.