Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-30
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX300-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 300mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke300 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-30
The AirTAC SAIJ160X300-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 300 mm nominal stroke by up to 30 mm for a precise 270-300 mm usable travel window. It delivers substantial thrust, generating 10053 N of pull force at 0.5 MPa, making it suitable for heavy-duty positioning tasks.
This configuration features a SUS304 stainless steel rod for superior corrosion resistance and utilizes a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU is supplied without a magnet. You can fine-tune the retract end position during commissioning without swapping hardware or adding external stops.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-30 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-30 Is Used
Heavy Press Tuning
Dial in the exact 270-300 mm end position during heavy press setup to accommodate material thickness variations without remounting the cylinder.
Product Changeover
Adjust the retract stop on the fly when switching between different pallet sizes on a high-thrust conveyor sorting line.
Large Fixture Alignment
Fine-tune the clamping reach on large automated fixtures, relying on the 10053 N pull force to secure heavy metal components.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-30 the Right Cylinder?
The adjustable 270-300 mm window is ideal for product changeovers, letting you set variable end-stops on the fly instead of machining new hard stops. For load-holding without live air pressure, note that the rear adjuster acts only as a travel stop and not a brake; you would need an external rod lock or a SAIL/BSAI cylinder for secure clamping.
Because the 300 mm stroke is relatively long for this large bore, ensure adequate external guidance to prevent excessive side-loading on the SUS304 rod. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. To match this unit exactly, specify the 160 mm bore, 300 mm stroke, 30 mm adjustment, PT port thread, SUS304 rod, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-30 FAQ
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from its 300 mm nominal length down to 270 mm. This allows precise end-position tuning at commissioning without adding external stops, though it does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX300-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.