Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-10
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX325-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 325mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke325 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-10
The AirTAC SAIJ160X325-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 315-325 mm, allowing you to dial back the 325 mm nominal stroke by up to 10 mm during commissioning.
This model is configured with a SUS304 stainless steel rod (code B) for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel incorporates sensor grooves on both sides, ready to accept AirTAC CMSE reed or DMSE electronic sensors if position feedback is added later. It supports a speed range of 30-500 mm/s and includes variable air cushions at both ends to manage deceleration.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-10 Is Used
Heavy-Duty Press Fine-Tuning
Dial in the exact 315-325 mm retract position during machine setup to accommodate material thickness variations without external stopper blocks.
Large Pallet Positioning
Halts large pallets precisely at a variable end-stop, using the rear adjuster to trim the stroke for different pallet dimensions on the same line.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-10 the Right Cylinder?
Choose this adjustable-stroke cylinder when your application requires exact end-position tuning without swapping out components or adding external stops. Because the 325 mm stroke exceeds 300 mm, an external guide is recommended to prevent excessive side-loading on the rod.
The rear adjuster acts purely as a travel stop to fine-tune the retract position, so it will not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL pneumatic lock or BSAI clamp-lock series. When replacing an ISO 15552 cylinder, match the 160 mm bore, 325 mm stroke, 10 mm adjustment, PT G3/4 port, and standard mounting options (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-10 FAQ
The rear adjusting screw acts as an external stopper that lets you shorten the effective stroke by up to 10 mm, providing a usable travel window of 315-325 mm. It sets the end position but does not lock the load without live air pressure.
The pull force is 9425N at 0.5 MPa and 16965N at 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.