Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 325mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke325 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S
The AirTAC SAIJ160X325-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling you to fine-tune the retract end-position during commissioning. It provides a usable travel window of 305-325 mm, allowing precise variable end-stops without adding external stops. It features a SUS304 stainless steel rod and an integrated magnet for position sensing.
Delivering 10053 N of pull force at 0.5 MPa (up to 18095 N push at 0.9 MPa), this 160 mm bore profile cylinder handles heavy loads. It uses PT tapered ports (G3/4) and includes variable air cushions at both ends. The rear adjuster acts as a travel stop, not a lock, so live air is required to hold the load.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S Is Used
Heavy Press Tuning
Dial in the exact 305-325 mm retract position on heavy pressing machinery during commissioning without machining external stop collars.
Product Changeover
Quickly adjust the end-stop by up to 20 mm on automated lines when switching product sizes, reducing machine downtime.
Material Forming
Leverage the 18095 N push force and variable air cushions to decelerate heavy metal or composite forming loads smoothly.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S the Right Cylinder?
Choose this adjustable-stroke model when your machine setup requires exact end-position tuning or frequent product-size changeovers without swapping cylinders. If you need less force, the 125 mm bore yields 5734 N of pull at 0.5 MPa. For load-holding without live air pressure, use an SAIL (air-released lock) or BSAI (clamp-lock) cylinder instead of relying on the adjuster.
To match this ISO 15552 cylinder, specify a 160 mm bore, 325 mm stroke, 20 mm adjustment, PT G3/4 ports, and a magnet for CMSE or DMSE sensors. Because the stroke is 325 mm, the 40 mm SUS304 rod and M36x2 thread carry high side-load capacity, but long unsupported travel still requires an external guide. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S FAQ
At 0.5 MPa it provides 10053 N of pull force and 14074 N of push force. At 0.9 MPa, the push force reaches 18095 N.
A rear stopper screw lets you trim the effective travel back by up to 20 mm, creating a 305-325 mm usable window. It acts as a travel stop, not a lock, so the cylinder needs live air to hold position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX325-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.