verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-10

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X100-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke100 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$88.16 $95.66Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-10

The AirTAC SAIJ50X100-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 90-100mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this standard configuration omits the internal magnet.

Equipped with a 20mm piston rod and M16x1.5 thread, this unit handles operational speeds of 30-800 mm/s effectively. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position during commissioning without adding external stops. It is important to note that this adjuster does not hold the load without live air pressure; for dead-load holding, consider the SAIL or BSAI series instead.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-10 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X100-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke100 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-10

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-10 Is Used

tune

Changeover Calibration

Dial in the exact retract distance within the 90-100mm window during product size changeovers on a packaging line without swapping out the entire cylinder.

precision_manufacturing

End-Stop Tuning

Fine-tune the final end position during machine commissioning to compensate for mechanical wear or sensor drift using the built-in rear stopper.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-10 the Right Cylinder?

The 10mm adjustable window is ideal for machine setups requiring exact end-position tuning during product changeovers. If fixed travel is sufficient and no field adjustment is needed, the standard SAI series is a simpler alternative.

For ISO 15552 replacement matching, verify the 50mm bore, 100mm nominal stroke, 10mm adjustment range, PT tapered port threads, and standard carbon steel rod. Since this model uses a 100mm stroke, it does not require external guide rails for side-load support, unlike longer 300mm+ strokes. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-10 FAQ

If you increase the pressure to 0.7 MPa, the push force rises to 1374N.

The rear adjuster screw allows you to shorten the effective stroke by up to 10mm, creating a usable travel window between 90mm and 100mm. It functions as a mechanical stop for end-position tuning and does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X100-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.