verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-20

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X100-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke100 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$88.16 $95.66Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-20

The AirTAC SAIJ50X100-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 100 mm stroke that can be fine-tuned down by 20 mm, giving you a usable 80-100 mm travel window for precise end-position calibration.

This adjustable design eliminates the need to swap cylinders or add external stops during machine commissioning. It features a robust 20 mm carbon steel rod with an M16x1.5 thread, paired with a 30 mm variable air cushion at both ends to manage deceleration. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE and DMSE switches.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-20 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X100-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke100 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-20

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-20 Is Used

tune

Changeover Calibration

Dial in the exact 80-100 mm retract stop during a product size changeover without swapping the cylinder or bolting on external stoppers.

precision_manufacturing

End-Position Tuning

Fine-tune the final end-of-stroke position at machine commissioning to compensate for mechanical tolerance stack-up.

factory

Variable Stroke Stops

Adjust the effective travel window on the fly for assembly lines running multiple slightly different product lengths.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-20 the Right Cylinder?

If your process needs less force, stepping down to a 40 mm bore yields 628 N; if you need more power, a 63 mm bore provides 1559 N. The SAIJ50X100-20 is selected over a fixed SAI specifically when a 80-100 mm travel window is required to dial in the exact retract position during product changeovers.

Dimensionally interchangeable per ISO 15552, this model uses a PT tapered G1/4 port and supports mountings from the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster acts as a travel stop, not a lock; a plain SAIJ will not hold a load without live air pressure, so for fail-safe holding consider the SAIL or BSAI series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-20 FAQ

At 0.9 MPa, the push force increases to 1767 N.

A rear adjuster screw lets you shorten the nominal 100 mm stroke by up to 20 mm, creating a usable travel window of 80-100 mm. The adjuster acts as a mechanical stop to set the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X100-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.