
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X100-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X100-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 70-100mm, allowing you to dial back the 100mm nominal stroke by up to 30mm during commissioning.
The extruded aluminum barrel includes dual sensor grooves for CMSE reed or DMSE solid-state switches, though this non-magnetized variant requires a separate -S option for position sensing. The carbon steel piston rod features an M16x1.5 thread, and the unit omits FB, CA, CB, and CR mounts, offering the standard SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 70-100mm retract distance instantly when swapping product fixtures, avoiding the need to physically replace the cylinder or add external shims.
Adjust the stroke length on packaging lines to handle different carton sizes, using the rear screw to set precise positioning without reprogramming the motion controller.
Trim the final few millimeters of travel during initial machine setup to perfect the timing and prevent mechanical interference, utilizing the 30mm adjustment window.
If your product line requires less force, the 40mm bore provides 628N; if you need more pull, step up to the 63mm bore with 1402N. The PT tapered G1/4 port matches the standard 50mm sizing.
The rear adjuster acts purely as a mechanical stop to fine-tune the retract end and cannot hold a load without live air pressure. For dead-stop load holding, consider an AirTAC SAIL or BSAI locking cylinder. This SAIJ50X100-30 is dimensionally interchangeable per ISO 15552, configured with a 100mm stroke, 30mm adjustment range, carbon steel rod, and no magnet.
Quick checklist
If pressure is increased to 0.7MPa, the push force reaches 1374N.
The rear adjuster screw allows you to mechanically shorten the 100mm nominal stroke, providing a usable travel window between 70mm and 100mm. This stopper only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.