
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X100-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X100-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjuster acts purely as a mechanical stop to set the retract end-position and cannot hold a load without live air pressure.
Featuring a carbon steel rod and a PT tapered G1/4 port, this unit includes a magnet for position sensing. The extruded aluminum barrel integrates sensor grooves on both sides, accepting AirTAC CMSE reed and DMSE electronic solid-state switches. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on fixed-stroke variants.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 70-100mm retract position during initial commissioning to perfectly align product stops without machining custom spacers.
Quickly adjust the stroke end-point by up to 30mm on a packaging line when switching to a different product size, minimizing downtime.
Use the built-in rear stopper to fine-tune the final resting position of the tooling, ensuring precise mechanical placement independent of fixed mechanical limits.
If your setup needs less force, the 40mm bore offers 628N; for heavier loads, the 63mm bore provides 1559N. Because the rear adjuster only restricts travel and is not a lock, use an AirTAC SAIL or BSAI cylinder if the mechanism must hold position safely during a complete loss of air pressure.
To replace an ISO 15552 cylinder, match the 50mm bore, 100mm stroke, 30mm adjustment, G1/4 PT port, and the required mounting bracket. Since the stroke here is 100mm, side-loading is minimal, but always ensure the 16mm rod and M12x1.25 rod thread are aligned with the load to prevent premature seal wear.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 100mm down to 70mm. It provides a 30mm adjustment window for fine-tuning the retract end position without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.