
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X100-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X100-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This -S variant includes a magnet for CMSE reed and DMSE electronic sensors, fitting neatly into the standard extruded aluminum barrel grooves. It uses a G1/4 port, a 20mm carbon steel rod, and supports mounting options Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in precise retraction points between 25 and 100mm during machine commissioning without swapping out the entire cylinder.
Quickly adapt automated lines to different product lengths by adjusting the rear stopper screw on the fly.
Choose this 50mm bore when you need more power than a 40mm cylinder (528N pull) but lack the space for a 63mm unit (1402N pull). The 75mm adjuster is perfect for product changeovers, letting you dial back the 100mm nominal stroke anywhere down to 25mm without adding external stops. For any setup exceeding 300mm of travel, an external guide is recommended to manage side loads.
When specifying an ISO 15552 replacement, match the 50mm bore, 100mm stroke, 75mm adjustment, PT tapered port threads, and the -S magnet. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For true load-holding, consider the SAIL or BSAI series.
Quick checklist
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective stroke from its 100mm nominal length down to as little as 25mm, giving a 75mm adjustment window. It is not a lock, meaning the cylinder still requires live air to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.