
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X105-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X105-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 105 mm stroke that can be fine-tuned backward by up to 40 mm, creating a usable travel window of 65-105 mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback.
This model uses a standard carbon steel piston rod with an M16x1.5 thread, paired with PT tapered port threads (G1/4). The rear adjuster functions strictly as a mechanical stop to set the end position and relies on the integrated air cushion for deceleration; it does not lock or hold the load without continuous air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X105-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 65 to 105 mm end-position during format changes on packaging lines without swapping out hardware.
Use the rear adjuster to fine-tune the retract stroke on machining fixtures where part sizes fluctuate slightly.
Perfect the end-of-travel position during commissioning to prevent overtravel damage on delicate assemblies.
The adjustable 65-105 mm travel window is perfect for machine setups requiring frequent product changeovers, eliminating the need to physically swap cylinders or add external stopper blocks. If your setup demands position holding without live air pressure, you will need an external pilot-operated check valve or a different cylinder type like the SAIL lock variant.
When replacing an ISO 15552 cylinder, ensure you match the 50 mm bore, 105 mm stroke, and 40 mm adjustment range. Confirm the PT port thread type, the required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2), and note that this specific SKU does not include a magnet for sensors.
Quick checklist
If you step up to 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 40 mm from the nominal 105 mm, providing an adjustable travel window of 65 to 105 mm. It acts as a mechanical stop and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.