
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X105-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X105-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 105 mm nominal stroke that can be dialed back by up to 75 mm, providing a wide usable travel window from 30 to 105 mm.
This adjustable-stroke design allows you to fine-tune the retract end position during commissioning or product changeovers without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It uses a PT tapered port thread and a carbon steel piston rod for standard industrial durability.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X105-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 30-105 mm window when switching between product sizes on a packaging line.
Fine-tune the end-of-stroke position during initial setup without machining external stopper blocks or changing the cylinder.
Accommodate multiple part lengths in a single fixture by adjusting the rear stopper screw to trim the effective stroke.
The rear adjuster acts purely as a travel stop and does not hold the load without live air; for load-holding without pneumatic pressure, consider an AirTAC SAIL or BSAI cylinder. To match this ISO 15552 interchangeable cylinder, specify the 50 mm bore, 105 mm stroke, 75 mm adjustment, PT port thread, and your required mounting option from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf of push force.
The rear adjuster screw allows you to shorten the 105 mm nominal stroke by up to 75 mm, creating a usable travel window of 30 to 105 mm. This stopper only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.