
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X110-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 110mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X110-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 110 mm nominal stroke that can be fine-tuned backward by up to 10 mm, yielding a precise 100-110 mm usable travel window for commissioning without external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet enables position detection using AirTAC CMSE reed or DMSE electronic sensors.
The rear adjuster acts strictly as a travel stop to dial in the end position, meaning it does not hold the load without live air pressure. It supports a speed range of 30-800 mm/s and includes adjustable air cushions at both ends to manage deceleration.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X110-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 100-110 mm retract position during product size transitions without adding external mechanical stops.
Fine-tune the final end-of-stroke position on tooling plates by up to 10 mm to compensate for mechanical wear.
The 10 mm adjustment range is ideal for product changeovers on a packaging line, allowing operators to shift the retract stop by up to 10 mm without swapping the cylinder. Because the rear screw is a stop and not a lock, a plain SAIJ will not hold a load without live air; for true fail-safe holding, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 110 mm stroke, PT tapered port threads, and the -S magnet option. The SAIJ mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 configurations, omitting the FB, CA, CB, and CR options. For this 110 mm stroke, the 20 mm rod handles standard side loads, but external guides are recommended for any unsupported loads.
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers up to 200 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 110 mm nominal stroke by up to 10 mm, creating a 100-110 mm usable travel window. It only sets the end position; it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.