
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X110-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 110mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X110-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the external adjustment screw at the rear, you can fine-tune the effective travel down from the 110mm nominal stroke, creating a precise 80-110mm usable window without adding external stops. This cylinder includes a magnet for position sensing and uses standard carbon steel for the piston rod.
The extruded aluminum barrel features sensor grooves on both sides to accept CMSE reed or DMSE solid-state switches. The SAIJ mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some fixed-stroke lines. It is important to note that the rear adjuster functions purely as a travel stop and works alongside the standard variable air cushions to decelerate the load; it does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X110-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 80-110mm travel window during product size changeovers on a packaging line, using the rear screw to set new end positions without changing the cylinder.
Fine-tune the retracted position during machine commissioning, eliminating the need to bolt on external physical stops to the fixture.
The adjustable 80-110mm travel window is ideal for machines that require exact end-position tuning during commissioning or product changeover, saving you from physically swapping out a fixed-stroke SAI cylinder. For any load-holding requirements during an air pressure loss, you must look to the SAIL (air-released lock) or BSAI (clamp-lock) series, as the SAIJ adjuster is only a stop.
This configuration uses a carbon steel rod with an M16x1.5 thread and PT tapered G1/4 ports. Because the 110mm stroke is relatively short, side-load stress on the 20mm rod is minimal, but you should always guide the load externally for smooth operation. The operating speed ranges from 30-800 mm/s.
Quick checklist
It operates at speeds between 30 and 800 mm/s.
The rear adjuster screw lets you shorten the 110mm nominal stroke by up to 30mm, creating an 80-110mm usable travel window. It acts as a physical stop to set the exact end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.