
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X115-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 115mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X115-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 115 mm stroke that can be dialed back by up to 100 mm, yielding a highly flexible usable travel window of 15 to 115 mm.
Equipped with a carbon steel piston rod and PT tapered port threads, this extruded aluminum body cylinder utilizes adjustable air cushions at both ends to manage deceleration. The rear adjuster acts strictly as a travel stop for end-position tuning, meaning it will not hold a load without continuous live air pressure. For load-holding requirements, external pilot-operated check valves or locking cylinders like the SAIL series are required.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position for different package lengths on a packaging line without swapping hardware, utilizing the 15-115 mm travel window.
Fine-tune the retract stroke during initial setup to perfect the timing and mechanical reach of automated assemblies.
Provide adaptable physical stops for testing fixtures where the required stroke length changes between different workpieces.
Selecting this 50 mm bore over a smaller 40 mm variant steps your thrust up significantly from 628 N to 982 N at 0.5 MPa, while moving to a 63 mm bore would push output to 1559 N. The massive 100 mm adjustment range is ideal for prototyping or production lines running multiple product sizes, allowing you to fine-tune the end stop during changeovers rather than physically swapping out cylinders or adding external stops. If you need to detect position, adding the -S magnet option enables the use of AirTAC CMSE reed or DMSE electronic solid-state sensors in the dual-side barrel grooves.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 115 mm stroke, 100 mm adjustment, PT port threads, and mounting choice. SAIJ supports a specific mounting subset including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Because the 115 mm stroke is under 300 mm, side-load stress on the M16x1.5 rod thread is moderate, though external guides are always recommended for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjusting screw allows you to shorten the effective travel by up to 100 mm. With the nominal 115 mm stroke, the usable travel window can be set anywhere from 15 mm to 115 mm without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.