verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X115-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 115mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke115 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$90.95 $98.45Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-30

The AirTAC SAIJ50X115-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the 115 mm nominal travel back by up to 30 mm. This yields a usable end-position window of 85-115 mm, allowing precise end-stop tuning at commissioning without adding external stops.

It uses a standard carbon steel rod with an M16x1.5 thread, paired with G1/4 PT tapered ports. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors. Its mounting set spans Basic, FA, LB, TC, FTC, TCM1 and TCM2, deliberately omitting FB, CA, CB and CR options.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X115-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke115 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×115Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-30 Is Used

tune

Product Changeover

Dial in the 85-115 mm retract distance during format size changes on packaging lines without swapping out the entire cylinder assembly.

precision_manufacturing

End-Stop Calibration

Fine-tune the final end position during machine commissioning using the rear screw, compensating for mechanical tolerance stack-up.

conveyor_belt

Variable Diverter

Adjust the stroke length on the fly for a pneumatic diverter gate handling varying package widths on a conveyor belt.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-30 the Right Cylinder?

The 30 mm rear adjuster is ideal for product changeovers on a line, letting you fine-tune the retract distance on the fly rather than machining new dead-stops. If your process requires holding the load without live air pressure, note that this adjuster acts only as a travel stop and not a brake; you would need an external rod lock or a SAIL/BSAI series cylinder instead. For ISO 15552 dimensional interchangeability, match the 115 mm stroke, 30 mm adjust range, G1/4 PT port, and your preferred mounting bracket.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-30 FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster screw acts as a mechanical stop that shortens the 115 mm nominal stroke by up to 30 mm, giving an effective travel range of 85-115 mm. It only sets the end position and does not lock or hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X115-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.