
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X115-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 115mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X115-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 115 mm travel back by up to 40 mm, creating a usable 75-115 mm end-position window. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback integration.
This model uses a 20 mm carbon steel rod with an M16x1.5 thread, providing a solid foundation for handling moderate side loads. Air is supplied via PT G1/4 tapered ports, and variable air cushions at both ends manage end-of-stroke deceleration. The rear stopper mechanism sets the travel limit but does not lock the load; for position holding without live air pressure, an external pilot-operated check valve or an AirTAC SAIL cylinder is required.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance during product size changeovers without physically replacing the actuator or re-engineering external stop blocks.
Fine-tune the 75-115 mm travel window at commissioning to perfectly seat components or absorb minor mechanical tolerance stack-ups.
Vary the stroke length on a conveyor sorting arm to push different carton sizes accurately into diverting lanes.
The integrated 40 mm adjustment range is ideal for fine-tuning the retract end during machine commissioning or adapting to slight product size variations without swapping out the physical cylinder or adding external hard stops.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 115 mm stroke, 40 mm adjustment, PT G1/4 ports, and the required mounting interface. SAIJ supports a specific mounting subset including Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, omitting the FB, CA, CB, and CR options found in some standard lines. Because this unit lacks a magnet, it cannot host internal position sensors; if electronic or reed switch feedback is needed, specify the -S variant for CMSE or DMSE compatibility.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 1374 N.
The rear adjuster acts as a mechanical stopper that lets you shorten the effective travel from the nominal 115 mm down to as little as 75 mm. This creates a 75-115 mm usable window for fine-tuning the end position at commissioning without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.