
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X115-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 115mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X115-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 115 mm stroke that can be dialed back by up to 75 mm, creating a highly flexible 40-115 mm usable travel window.
This adjustable design allows you to fine-tune the retract end position during commissioning or product changeovers without swapping the cylinder. It features a carbon steel piston rod with an M16x1.5 thread, dual-side sensor grooves for CMSE or DMSE switches, and PT tapered ports. The rear adjuster acts purely as a travel stop for deceleration, meaning it will not hold a load without continuous live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X115-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 40-115 mm travel window during format changeovers to accommodate varying package sizes without changing cylinder hardware.
Fine-tune the retract end position at commissioning using the rear stopper, avoiding the need to bolt on external physical stops.
Adjust the stroke dynamically on a sorting line to push different height items accurately at 0.5 MPa operating pressure.
The generous 75 mm adjustment range is selected over a fixed-stroke SAI cylinder when a machine handles multiple product sizes and needs variable end-stops on the fly. To match this exact ISO 15552 replacement, specify a 115 mm stroke, 75 mm adjustment, PT port thread, and no magnet. Because the nominal stroke is under 300 mm, standard mountings handle the load without needing external side-load guides.
For load-holding requirements without live air, note that the rear adjuster and air cushions function only as stops, not locks. You would need to specify an SAIL pneumatic lock or an external rod lock for secure position holding. Mounting options include the standard SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw allows you to shorten the effective stroke from its 115 mm nominal length by up to 75 mm, providing a usable travel window of 40 to 115 mm. It acts as a mechanical stop to set the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.