
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X120-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 120mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X120-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 80 to 120 mm from its 120 mm nominal stroke. The integrated -S magnet allows precise position sensing with CMSE reed or DMSE electronic switches.
This adjustable model uses a carbon steel piston rod with an M16x1.5 thread, providing robust side-load resistance for dynamic setups. The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting. You can fine-tune the retract end-position at commissioning without adding external stops, making it ideal for product changeovers.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X120-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position from 80 to 120 mm during commissioning to accommodate varying product sizes without swapping hardware.
Quickly adjust the stroke length on packaging lines when switching between different carton formats or component widths.
Leverage the internal magnet and dual sensor grooves to trigger CMSE or DMSE switches at custom adjusted endpoints.
Choose this 50 mm bore when a 40 mm bore yields insufficient force (528 N pull at 0.5 MPa) but a 63 mm bore is physically oversized. The 40 mm adjustment range is perfect for dialing in exact end stops during machine setup. For applications requiring the cylinder to hold a load without live air pressure, note that the SAIJ rear adjuster acts only as a travel stop; consider an AirTAC SAIL or BSAI series for true pneumatic locking.
To match this ISO 15552 interchangeable cylinder, specify the 50 mm bore, 120 mm stroke, 40 mm adjustment, PT tapered port thread, and the -S magnet option. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf of push force.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 120 mm down to 80 mm. It sets the travel end and relies on the air cushion for deceleration, but it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.