
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X125-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 125mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X125-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 115 to 125 mm, allowing you to dial back the extend position by up to 10 mm during commissioning.
Unlike a fixed-stroke SAI cylinder, this model integrates an external stopper screw at the rear cap, eliminating the need to add external physical stops for minor end-position tuning. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE solid-state switches, though this specific SKU is configured without a magnet. It features a standard carbon steel piston rod and PT tapered port threads (G1/4).
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X125-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 115 to 125 mm extend position during product size transitions without disassembling the actuator or adding external stopper blocks.
Sets a precise lower end-position for light assembly presses, using the rear stopper to tune the final 10 mm of travel rather than relying solely on the air cushion.
If your process needs less force, stepping down to a 40 mm bore yields 628 N; if you need higher clamping power, a 63 mm bore provides 1559 N. The 10 mm rear adjustment is ideal for product-size changeovers on a conveyor line, letting operators fine-tune the extend stroke without swapping out the cylinder body.
For ISO 15552 dimensional interchangeability, match the 50 mm bore, 125 mm stroke, 10 mm adjustment, G1/4 PT ports, and your required mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Remember that the rear adjuster acts only as a travel stop and does not hold the load mechanically. If static load-holding without live air pressure is required, consider the AirTAC SAIL or BSAI series instead.
Quick checklist
It features a rear stopper screw that lets you mechanically shorten the effective stroke by up to 10 mm. This creates a usable travel window of 115 to 125 mm, meaning you can set the extend end-position anywhere within that range without changing the cylinder.
At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.