
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X130-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 130mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X130-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 55 to 130 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides, and because this variant includes a magnet (-S), it supports precise position detection via AirTAC CMSE reed or DMSE electronic solid-state switches.
This model features PT tapered port threads and provides variable air cushioning at both ends to decelerate the piston smoothly. The rear adjuster acts purely as a mechanical stop to fine-tune the retract end position during commissioning or product changeover without adding external stops. It is not a locking device, so live air pressure is required to hold the load in place.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X130-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 55 to 130 mm retract position during product size transitions without swapping out the entire cylinder or adding external stopper blocks.
Leverage the integrated -S magnet with DMSE electronic sensors to confirm the adjusted end-of-stroke position in automated assembly lines.
Fine-tune the final resting position of clamps or actuators during initial commissioning to perfect timing and avoid mechanical binding.
The 75 mm adjustment range is ideal for machinery requiring highly variable end-stops, offering far greater positioning flexibility than a fixed-stroke SAI cylinder.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 130 mm nominal stroke, PT tapered ports, and the -S magnet requirement. The compatible SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR. Since the 130 mm stroke is relatively short, external guiding is less critical, but the adjuster should never be relied upon to hold a load without air pressure; for true drop-prevention, consider an SAIL or BSAI locking cylinder.
Quick checklist
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from 130 mm down to 55 mm. It sets the travel end-point during commissioning but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.