verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X135-50

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X135-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 135mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke135 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$93.48 $100.98Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X135-50

The AirTAC SAIJ50X135-50 is a double-acting profile cylinder with a rear stroke adjuster, built on the ISO 15552 mounting interface. It features a 50mm bore and a 50mm adjustment range, yielding a usable travel window of 85-135mm. This allows precise end-position tuning at commissioning without swapping the unit or adding external stops.

The rear screw acts as a travel stop to set the retract position, but it does not lock the load without live air pressure. This extruded aluminum profile cylinder includes sensor grooves on both sides and uses a G1/4 port with a 20mm diameter carbon steel rod. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X135-50 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X135-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke135 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X135-50

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×135Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X135-50 Is Used

tune

Machine Setup

Fine-tune the 85-135mm travel window during commissioning to perfectly dial in the end position without external stops.

settings_input_component

Product Changeover

Quickly adjust the retract end-stop to accommodate varying product sizes on a single production line.

precision_manufacturing

Variable End Stops

Use the 50mm rear adjustment screw to set precise, repeatable end positions for machining or clamping tasks.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X135-50 the Right Cylinder?

If you need less force, the 40mm bore provides 628N; if you need more, the 63mm bore offers 1559N. The 50mm adjustment range is ideal for product-size changeovers on a line, letting you dial in the exact 85-135mm travel window on the fly instead of installing a fixed-stroke SAI cylinder. For load-holding without live pressure, consider the SAIL or BSAI series, as this adjuster is only a stop. When matching an ISO 15552 replacement, verify the 135mm stroke, 50mm adjust, PT port, and your mounting choice.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X135-50 FAQ

At 0.7MPa, the push force increases to 1374N.

The rear adjuster lets you shorten the 135mm nominal stroke by up to 50mm, creating a usable travel window of 85-135mm to fine-tune the end position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X135-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X135-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.