verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X140-20S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X140-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 140mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke140 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$97.21 $104.71Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X140-20S

The AirTAC SAIJ50X140-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 140 mm travel by up to 20 mm. This creates a precise 120-140 mm usable window, enabling fine end-position tuning at commissioning without swapping the cylinder or adding external stops.

This variant features a standard carbon steel piston rod and includes a magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel incorporates sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments. The rear adjuster acts purely as a travel stop to set deceleration endpoints, not as a lock, so it will not hold a load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X140-20S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X140-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke140 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X140-20S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×140Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X140-20S Is Used

tune

Machine Changeover

Dial in the 120-140 mm travel window during product size transitions without replacing the cylinder or bolting on external stops.

settings_input_component

Commissioning Tuning

Fine-tune the exact retract end-position at startup to perfect the mechanical timing of your assembly process.

conveyor_belt

Variable End Stops

Adjust the stroke dynamically on packaging lines to accommodate different carton sizes on the fly.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X140-20S the Right Cylinder?

Select this 50 mm bore adjustable-stroke model when your machine setup requires variable end-stops or product-size changeovers on the fly, offering a clear advantage over a fixed-stroke SAI cylinder. For an exact ISO 15552 replacement match, ensure your specifications align with a 140 mm stroke, 20 mm adjustment range, PT tapered port threads, and a magnet (-S) for sensor compatibility.

Because the 140 mm stroke is relatively short, side-load stress on the 20 mm rod and M16x1.5 thread is minimal, though long unsupported strokes still require an external guide. Remember that the rear screw and air cushions only manage travel ends; for true load-holding without live pressure, consider an external rod lock, a pilot-operated check valve, or related AirTAC types like the SAIL or BSAI.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X140-20S FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster screw lets you shorten the effective travel from the nominal 140 mm down to a minimum of 120 mm, creating a 120-140 mm usable window. It functions as a mechanical stop for end-position tuning, not as a load-holding lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X140-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X140-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.