
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X140-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 140mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X140-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 65 to 140 mm, allowing you to dial back the nominal stroke by up to 75 mm during commissioning.
The external adjuster acts strictly as a travel stop to fine-tune the retract end without swapping the cylinder or adding external stops. It is not a locking device, so live air is required to hold the load. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed and DMSE electronic switches, though this specific SKU is configured without a magnet. It uses a PT tapered port thread and a carbon steel piston rod.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X140-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract end-position during startup. The 75 mm trim window lets you fine-tune the stroke without machining new hard stops.
Adjust the travel from 65 to 140 mm on the fly to accommodate different sized parts on the same production line.
Use the rear stopper to set precise package positioning distances on conveyors, allowing quick resets for various box lengths.
If you need less force, the 40 mm bore offers 628 N; if you need more, the 63 mm bore provides 1559 N. The 75 mm adjustment range is exceptionally wide, making this cylinder ideal for machines that process multiple product sizes and need variable end-stops on the same line.
For a direct ISO 15552 replacement, match the 50 mm bore, 140 mm stroke, PT port thread, and the desired mounting accessory from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because this SKU lacks the -S magnet, position sensing must be handled externally or by selecting a different variant. The carbon steel rod is standard, and the cylinder relies on live air for position holding.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf of push force.
The rear adjuster acts as a mechanical stop that shortens the effective travel. For this model, you can trim the 140 mm nominal stroke back by up to 75 mm, resulting in a usable travel window of 65 to 140 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.