
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X145-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 145mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X145-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. This extreme adjustability is perfect for prototyping or production lines needing frequent end-position changes without swapping hardware.
It features a carbon steel piston rod and a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides. If position detection is needed later, you can use AirTAC CMSE reed or DMSE electronic sensors, though this specific SKU is configured without a magnet. The rear stopper sets the retract end position but does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45 to 145mm end-position rapidly during format size changes on packaging lines without changing the cylinder.
Fine-tune the retract distance during machine setup to perfectly align stops and prevent mechanical interference.
Provide a flexible 100mm adjustment range for prototyping fixtures where the final stroke length is not yet finalized.
If you need more power, a 63mm bore provides 1559N. This SAIJ model is preferred over a fixed SAI cylinder when machine setups demand frequent product-size changeovers or precise commissioning tuning.
Because the 145mm stroke is below the 300mm threshold, side-load risks are moderate, but always ensure proper external guiding for heavy loads. Remember that the rear adjuster acts only as a travel stop, not a brake; for load-holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder. This unit uses PT ports and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
At a maximum operating pressure of 0.9 MPa, the push force increases to 1767N.
The rear adjuster screw allows you to trim the effective stroke by up to 100mm. This creates a usable travel window of 45-145mm, letting you set the exact retract end position without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.