verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X145-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 145mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke145 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$93.48 $100.98Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-30

The AirTAC SAIJ50X145-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 115-145 mm usable travel window, allowing you to dial back the 145 mm nominal stroke by up to 30 mm.

The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The carbon steel piston rod features an M16x1.5 thread, offering a robust interface that handles moderate side loads well. This model uses PT tapered port threads and omits the FB, CA, CB, and CR mounting options found on some standard cylinders, utilizing a focused set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X145-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke145 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×145Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-30 Is Used

settings_input_component

Product Changeovers

Dial the stroke back by up to 30 mm to accommodate slightly shorter product sizes on the line without physically swapping the actuator.

precision_manufacturing

Commissioning Tuning

Fine-tune the retract end-position during machine setup to achieve precise mechanical alignment without adding external shims.

factory

Variable End-Stops

Create a flexible end-stop window between 115 and 145 mm for automated equipment requiring minor positional adjustments.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-30 the Right Cylinder?

The 30 mm rear adjuster is ideal for fine-tuning the end position during commissioning or product changeovers without adding external stops. For strokes of 145 mm, side-load is minimal, but always guide the load for smooth operation. Remember, the rear adjuster acts as a travel stop, not a lock; if you need to hold the load without live air pressure, select a SAIL or BSAI cylinder instead. To match this ISO 15552 replacement exactly, verify the 50 mm bore, 145 mm stroke, 30 mm adjustment, PT G1/4 ports, and the required mounting interface.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-30 FAQ

At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.

The rear adjuster screw acts as a mechanical stop that can shorten the 145 mm nominal stroke by up to 30 mm, giving an effective travel window of 115 to 145 mm. It does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X145-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.