
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X145-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 145mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X145-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to a 105-145 mm window. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches.
This model uses a 16 mm carbon steel rod with an M16x1.5 thread, paired with a PT tapered port and 30 mm air cushions at both ends. The rear adjustment screw acts purely as a mechanical stop to set the retract end position and must not be confused with a locking mechanism. For true load-holding without live air pressure, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X145-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract position within the 105-145 mm window during machine commissioning to accommodate different material thicknesses without hardware changes.
Quickly adjust the stroke length on packaging lines when switching between varying carton dimensions, ensuring precise stops at the new end position.
Fine-tune the clamping travel on mid-force assemblies to prevent over-travel and crush damage, using the rear screw to set the exact 145 mm limit.
If your process needs less force, stepping down to a 40 mm bore yields 628 N, while moving up to a 63 mm bore provides 1559 N. The 40 mm adjustment range is ideal for product-size changeovers, letting you dial in the exact end position without swapping cylinders or adding external stops. Because the 145 mm stroke is under 300 mm, side-load stress is minimal, though long unsupported loads still require external guidance.
To match this ISO 15552 cylinder for a replacement, verify the 50 mm bore, 145 mm stroke, 40 mm adjustment range, PT G1/4 port, and standard carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. This unit ships without a magnet, so position sensing requires adding a separate external sensor track or upgrading to an -S variant.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear mechanical stopper allows you to shorten the nominal 145 mm stroke by up to 40 mm, creating a usable travel window of 105 to 145 mm. This adjuster only sets the end position and does not lock the load; live air pressure is required to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.