
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X150-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X150-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear mechanical stroke adjuster. It provides a 140-150 mm usable travel window by allowing you to dial back the nominal 150 mm stroke by up to 10 mm.
This adjustable-stroke design eliminates the need to swap cylinders or add external stops during machine commissioning. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It uses a G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread, supporting moderate side loads, while the rear adjuster acts purely as a travel stop rather than a load-holding lock.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 140-150 mm travel distance during initial machine setup without machining external stopper blocks.
Quickly adapt the end-of-stroke position on a packaging line when switching between different carton sizes.
Fine-tune the retract position to compensate for mechanical wear or minor dimensional shifts in tooling over time.
If your process demands less force, the 40 mm bore provides 628 N; if you need substantially more power, stepping up to the 63 mm bore yields 1559 N.
The rear adjuster and integrated air cushions only decelerate the load at the travel end; they do not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series instead. This SAIJ configuration features PT tapered ports, a standard carbon steel rod, no position magnet, and an ISO 15552 mounting interface utilizing Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.
Quick checklist
A rear adjuster screw mechanically stops the piston short of the standard 150 mm stroke, creating a 140-150 mm usable travel window. It functions as a hard stop for position tuning, not as a lock to hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.