
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X150-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X150-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 150 mm nominal stroke that can be dialed back by up to 100 mm, creating a highly flexible 50-150 mm usable travel window.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch mounting. It uses a standard carbon steel piston rod and tapered PT ports. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position, meaning it does not hold the load without continuous live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial back the stroke from 150 mm to 50 mm to accommodate varying package sizes on a single line without changing cylinder hardware.
Perfect the retract end-position during machine setup using the rear stopper screw, avoiding the need to fabricate and install external spacers.
Ideal for automated tooling that requires multiple retract depths within the 50-150 mm travel window to handle diverse part geometries.
If your setup only needs 528 N of pull force, you could step down to a 40 mm bore, but the massive 100 mm adjustment range on this model is what sets it apart. It allows you to shorten the effective stroke dynamically during commissioning without swapping the cylinder or adding external stops.
For an exact ISO 15552 replacement match, specify the 50 mm bore, 150 mm stroke, 100 mm adjustment, PT port thread, and no magnet. Note that while the rear screw sets the travel end, it is not a locking device; for load-holding without live air, consider an external rod lock or pilot-operated check valve. The mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw allows you to mechanically shorten the 150 mm nominal stroke by up to 100 mm, providing a usable travel window of 50 to 150 mm. It functions as a hard stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.