
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X150-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X150-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel end position. With a 150 mm nominal stroke and a 20 mm adjustment range, it provides a usable travel window of 130 to 150 mm.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. Unlike fixed-stroke SAI cylinders, this model lets you dial in the exact retract position during commissioning or product changeovers. The rear adjuster acts purely as a mechanical stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the 130-150 mm travel window to accommodate new product sizes on a packaging line without replacing the cylinder.
Fine-tune the retract stop during commissioning to perfectly align parts, eliminating the need for external stopper blocks.
Act as a sorting gate where the exact extended position needs slight field adjustments to handle varying package dimensions.
If you need less force, the 40 mm bore offers 628 N; for heavier loads, the 63 mm bore provides 1559 N. The adjustable 130-150 mm travel window is ideal for accommodating slight mechanical variations or product size changes on a line without swapping out the cylinder.
This SAIJ50X150-20 configuration features a PT tapered port thread, a 16 mm carbon steel rod, and no magnet. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 150 mm stroke is under 300 mm, side-load stress is moderate, but an external guide remains recommended for optimal rod bearing life. For applications requiring true load-holding without live air, consider the SAIL or BSAI series instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw lets you mechanically shorten the effective stroke by up to 20 mm. This creates a 130-150 mm usable travel window, allowing precise end-position tuning without changing the cylinder or adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.