verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-40

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X150-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke150 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$93.48 $100.98Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-40

The AirTAC SAIJ50X150-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel down from 150 mm to a minimum of 110 mm. This 40 mm adjustment window is ideal for dialing in exact end positions during machine commissioning or product changeovers without swapping out the barrel.

The extruded aluminum barrel includes sensor grooves on both sides for mounting AirTAC CMSE reed or DMSE electronic solid-state switches, though this specific SKU is supplied without a magnet. The rod is carbon steel with an M16x1.5 thread, and the cylinder uses adjustable air cushions at both ends to decelerate the load. Remember that the rear adjuster functions strictly as a travel stop and does not hold the load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-40 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X150-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke150 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-40

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-40 Is Used

tune

Machine Commissioning

Fine-tune the 110-150 mm travel window during setup to hit exact datum points without disassembling the actuator.

settings_input_component

Product Changeover

Quickly dial back the end-of-stroke stop by up to 40 mm when a production line switches to a different package size.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-40 the Right Cylinder?

The 40 mm adjustable window lets you set variable end stops on the fly, which is far more efficient than machining custom spacers or buying multiple fixed-stroke SAI cylinders. For holding a load securely without continuous air supply, this cylinder will not suffice; you would need to step over to the SAIL air-released lock or BSAI clamp-lock series instead.

When replacing an ISO 15552 cylinder, match the 50 mm bore, 150 mm nominal stroke, 40 mm adjustment range, PT tapered port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 150 mm stroke is under the 300 mm side-load threshold, standard mounting is acceptable, but long unsupported loads should still use an external guide.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-40 FAQ

A rear stopper screw lets you mechanically shorten the 150 mm nominal stroke by up to 40 mm, providing an effective travel window of 110 to 150 mm. The adjuster sets the end position but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X150-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.