
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X150-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X150-50-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a nominal stroke of 150 mm and a 50 mm adjustment range, it provides a usable travel window of 100-150 mm. This allows you to dial in the exact retract end-position during commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE solid-state switches.
The robust rod diameter handles moderate side loads well, though long unsupported strokes still require an external guide. The rear adjuster acts purely as a travel stop for end-position tuning, meaning it does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 100 to 150 mm during machine commissioning to accommodate varying material thicknesses without swapping out the cylinder.
Quickly adjust the stroke stop on automated lines handling different product sizes, reducing setup downtime between production runs.
Leverage the built-in magnet with CMSE and DMSE sensors to confirm exact end-positions after fine-tuning the 50 mm adjustment window.
Choose this 50 mm bore adjustable-stroke cylinder when your application requires fine-tuning the retract distance on the fly, such as during machine setup or product changeover.
For load-holding requirements without continuous air pressure, note that this standard SAIJ adjuster is a stop, not a lock. You would need to explore the SAIL air-released lock or BSAI clamp-lock series instead. This SAIJ50X150-50-S model is dimensionally interchangeable per ISO 15552 and comes configured with a PT tapered port thread, a carbon steel rod, and a magnet for position sensing. Because the stroke is 150 mm, side-load risks are minimal, but standard mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the nominal 150 mm down to 100 mm. It is a travel stop for fine-tuning, not a lock, and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.