
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X150-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X150-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 150 mm stroke that can be dialed back by up to 75 mm, creating a wide 75-150 mm usable travel window.
This adjustable design eliminates the need to swap cylinders or bolt on external stops during product changeovers. The rear screw acts purely as a travel stop for end-position tuning, not a load-holding lock, meaning live air is required to maintain position. For applications needing static holding without air pressure, consider the SAIL or BSAI series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X150-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 75-150 mm travel window on the fly to accommodate varying package lengths on a packaging line without changing hardware.
Fine-tune the exact retract position during machine setup, using the rear adjuster to perfect alignments without adding external mechanical stops.
Adjust the effective stroke to alter the discharge volume or reach of a tooling head, providing flexibility on a single shared fixture.
The 75 mm adjustment range is ideal for machines running multiple product sizes, allowing you to fine-tune the retract end-position at commissioning without changing the cylinder. Since the stroke is 150 mm, side-load is minimal, but always ensure the load is guided to protect the 20 mm rod.
To match this ISO 15552 interchangeable cylinder, confirm the 150 mm stroke, 75 mm adjust code, PT G1/4 port, and your required mounting set. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR. This SKU does not include a magnet; add an -S suffix if you require CMSE reed or DMSE electronic sensors.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear adjuster screw lets you trim the effective travel back by up to 75 mm from the 150 mm nominal stroke, resulting in a usable 75-150 mm window. It functions as a mechanical stop for position tuning and requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.