
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. This fine-tuning capability eliminates the need to swap out the entire cylinder or bolt on external stops when aligning end positions.
Built with a carbon steel piston rod and standard PT tapered port threads, this extruded aluminum profile cylinder includes variable air cushions at both ends to manage deceleration. The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure. For position holding without continuous air, consider the SAIL or BSAI locking variants.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 145-155mm travel distance during machine setup to perfect part seating without adding external shims.
Quickly adjust the rear stopper by up to 10mm to accommodate varying package sizes on a packaging line.
Fine-tune the retract end position for precise component alignment in automated assembly stations.
The 10mm adjustment window is ideal for product changeovers where slight positional shifts are needed. To replace an ISO 15552 cylinder, match the 50mm bore, 155mm stroke, PT port threads, and standard carbon steel rod.
Since the 155mm stroke is below the 300mm threshold, side-load risks are moderate, but external guides should still be used for heavy lateral loads. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR brackets.
Quick checklist
At 0.7MPa, the push force increases to 1374N.
The rear adjuster screw allows you to shorten the effective stroke from the nominal 155mm down to 145mm. This creates a 145-155mm adjustable travel window for fine-tuning the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.