
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-100 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 155 mm nominal stroke by up to 100 mm. This creates a wide 55-155 mm usable travel window, perfect for prototyping or production lines that frequently handle varying product sizes.
This 50 mm bore unit features a 20 mm carbon steel rod, a PT tapered port thread, and variable air cushions at both ends to manage impact. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not lock the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 55 to 155 mm during format changes, accommodating different package lengths on the same conveyor line.
Fine-tune the retract position at commissioning without machining new hard stops, drastically reducing iteration time for custom tooling.
Use the 100 mm adjustment window to vary the clamping depth or ejection stroke dynamically across multiple distinct operations.
The generous 100 mm adjustment range is ideal for machine changeovers, letting you fine-tune the end position without swapping cylinders or adding external stops. If your setup only requires a fixed end position, the standard SAI cylinder is a simpler alternative.
To match this exact ISO 15552 replacement, specify a 50 mm bore, 155 mm stroke, PT port thread, and carbon steel rod. Because the nominal stroke is 155 mm, side-loading is minimal, but ensure the 20 mm rod thread is aligned correctly to prevent binding. Note that the mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 155 mm nominal stroke down to as little as 55 mm. It sets the end position but does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.