
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 155 mm travel by up to 100 mm. This creates a highly flexible 55 to 155 mm usable stroke window, perfect for product changeovers on a shared machine frame.
This unit includes a standard piston magnet for position sensing via AirTAC CMSE reed and DMSE electronic switches, which seat cleanly into the dual-side sensor grooves on the extruded aluminum barrel. The M16x1.5 rod thread and carbon steel rod provide robust load transmission, while the PT tapered port threads match legacy pneumatic layouts. The rear adjuster acts purely as a mechanical stop and does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance for different package lengths on a single conveyor line without replacing the cylinder.
Fine-tune the end-of-stroke position during machine setup to align tooling perfectly, avoiding the need for external stopper blocks.
Adjust the effective travel window between 55 and 155 mm to accommodate multiple material thicknesses in a pressing application.
If your process needs less force, stepping down to a 40 mm bore yields 628 N; if you require higher thrust, the 63 mm bore provides 1559 N. The adjustable stroke is ideal for fine-tuning retract positions at commissioning without swapping the cylinder or bolting on external stops.
Because the nominal stroke is 155 mm, no external guide is required for side-load mitigation. To replace an ISO 15552 cylinder, match the 50 mm bore, 155 mm stroke, 100 mm adjustment, PT port thread, and the -S magnet. Remember that the rear adjuster and air cushions only decelerate the travel end; for true load-holding without live pressure, select a SAIL or BSAI series cylinder. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf.
The rear adjuster screw lets you shorten the 155 mm nominal stroke by up to 100 mm, creating a usable travel window of 55 to 155 mm. The adjuster acts as a mechanical stop and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.