
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The carbon steel rod and M16x1.5 rod thread provide robust load transmission, while the extruded aluminum barrel incorporates sensor grooves on both sides for flexible mounting of CMSE reed and DMSE electronic switches.
This model uses PT tapered port threads and includes the -S magnet option for piston position sensing. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position during commissioning or product changeover, replacing the need for external stops. It is dimensionally interchangeable per ISO 15552 mounting interfaces and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 135 to 155mm during product size transitions without replacing the cylinder or adding external stopper blocks.
Fine-tune the final end-of-stroke position during machine commissioning to compensate for mechanical tolerance buildup in the fixture.
Adjust the stroke on the fly to push different sized items on a conveyor line, using the rear stopper to set the exact travel limit.
If you need less force, the 40mm bore offers 628N; if you need more, the 63mm bore provides 1559N. Choose the SAIJ adjustable-stroke design over a fixed SAI cylinder when you need to trim the travel window during machine setup without physically swapping the cylinder. To match this exact configuration for an ISO 15552 replacement, specify the 50mm bore, 155mm stroke, 20mm adjustment, PT ports, and the -S magnet option.
Because the nominal stroke is 155mm, side-load risks are minimal, but always ensure the M16x1.5 rod thread is properly aligned with the load. Remember that the rear adjuster is a travel stop, not a lock; this cylinder cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Quick checklist
At 0.7MPa, the push force increases to 1374N.
The rear adjuster screw allows you to shorten the effective stroke by up to 20mm from the nominal 155mm, giving a usable travel window of 135-155mm. The adjuster acts as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.