
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 125-155 mm usable travel window, allowing you to dial back the 155 mm nominal stroke by up to 30 mm. The extruded aluminum barrel features sensor grooves on both sides for straightforward positioning feedback.
This model features a standard carbon steel rod with an M16x1.5 thread, paired with PT tapered ports for pneumatic connections. The rear adjuster acts purely as a mechanical stop to set the end position and does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 125-155 mm retract position during initial machine commissioning without machining custom spacers or installing external hard stops.
Quickly adapt the cylinder's effective stroke on packaging lines when switching to a different product size, minimizing downtime between runs.
Use the 30 mm adjustment range to fine-tune the end-of-stroke contact point in testing fixtures, ensuring precise physical positioning of parts.
If you need less force, the 40 mm bore offers 628 N; if your load is heavier, stepping up to the 63 mm bore provides 1559 N. The adjustable rear screw allows you to fine-tune the retract position during commissioning without adding external stops or swapping out a fixed-stroke SAI cylinder.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 155 mm stroke, 30 mm adjustment range, PT port thread, and the required mounting style. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because the stroke is under 300 mm, side-load stress is moderate, though external guides are still recommended for optimal rod longevity.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster acts as a mechanical stop that shortens the 155 mm nominal stroke, providing a usable travel window of 125-155 mm. It sets the end position but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.