
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X155-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X155-30-S is a double-acting ISO 15552 profile cylinder featuring a built-in rear stroke adjuster. It provides a 125-155 mm usable travel window, allowing you to dial back the 155 mm nominal stroke by up to 30 mm during commissioning.
This variant includes a magnetic piston for position sensing with CMSE reed or DMSE electronic switches. The extruded aluminum barrel integrates sensor grooves on both sides, and the standard carbon steel rod uses a PT tapered port thread. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X155-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 125-155 mm end position during machine commissioning to accommodate varying product lengths without swapping cylinders.
Quickly adjust the rear stopper by up to 30 mm when the production line switches to a different package size, minimizing downtime.
Fine-tune the clamping travel on the fly to ensure precise force delivery against parts without over-stroking the mechanism.
Choose this 50 mm bore when you need precise end-stop control without adding external stops; for lighter duty, a 40 mm bore yields 628 N at 0.5 MPa, while upgrading to a 63 mm bore provides 1559 N. Select the adjustable SAIJ over a fixed-stroke SAI when facing frequent product changeovers that require variable end positions. To match an ISO 15552 replacement, specify the 50 mm bore, 155 mm stroke, 30 mm adjustment, PT G1/4 port, and the -S magnet.
For any application approaching or exceeding 300 mm of stroke, external guide rails are recommended to manage side loads, though this 155 mm stroke is well within standard rod limits. Remember that the SAIJ adjuster only sets the travel end; if you need true load-holding without continuous air, consider the SAIL lock or BSAI clamp-lock series instead.
Quick checklist
The rear adjusting screw acts as a mechanical stopper that trims the effective travel back by up to 30 mm, creating a 125-155 mm usable stroke window. It only sets the end position and does not function as a lock to hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.